patriotic printable envelope address template

Follow the same instructions as above to put them together. You will make 1″ circles for these two size rosettes. When you have finished the 9″ one, go back to design space, you will shrink them down to 6″, you can duplicate all two sections and put four sections on one paper. Put the rosettes together in the same manner as above. Then you will cut out another two pages for this size rosette. Now we are going to go back to design space, grab the image and shrink it down to 9″ wide. Repeat the process for the second 11″ circle, choose whatever paper pattern you would like. While it is squished together, hold it with your hand and hot glue the center an place a dot in the center of the paper on the glue.Īfter you glue the front dot, turn it over and add some glue to the center and choose another dot and push it on the glue. Make sure you use enough hot glue to give you enough time to line them up.Īfter you have the long strip you can put the ends together, hold them with one hand, pinch it, push it together and seal the ends. So we are going to glue them all together. There are four sections to make a circle. Once you learn this process it is all just repeating the process. You will do a circle on the front of the rosette and a circle on the back. Take a piece of scrap paper that is double sided and load it into your machine. There is a strip of paper that you fold over on the end, you can cut those off if you’d like. While that is cutting you can be folding the ones that have already cut. But the 11″ and the 9″ will take two pieces of paper per rosette. As you shrink the design down the 6″ and the 3″ you can fit all of them on one piece of paper. Once that is done cutting, we will add in another sheet of paper. Do not take your mat out! Just follow the prompts on your screen. When it is done scoring you will replace it with the cutting blade. When you are putting this in your machine make sure you put the scoring blade in first.

Two that are 11″, one that is 9″, one that is 6″, and three that are 5″. You are going to be making seven rosettes. Gather all of your supplies together that I have listed above. I used reversible cardstock so you can pick which side you want to use. If you have extra room on your cutting mat you can add the circles or use a scrap piece. Make the circles 1.5 inches for the larger rosettes. You will also need circles for this project. Choose cardstock for the material when you are ready to cut.

You will then duplicate the whole layer and make sure it is 11″ across. After they are in place, you will select everything and click attach. You will duplicate the score line and place them on each hump line. Take a score line, stretch it long to fit the length of the project. Simply put your information in below and we will email it to your for free! How to Make Paper Fans With a Cricut Machine To make these fans, you will need the scalloped SVG.

Patriotic printable envelope address template